Hi guys I am trying to remove the DS door card on a 1993 imported Sol, I have removed all the visible screws and the door release but the card seems to be held at the door pull handle! Thanks for any info John
Thats how all the door handles all get broken . The door rods have flappy plastic connectors, dont try and twist the handle through the door card as this will probably also break the fragile plastic handles and they cost a fair wack to replace.
Hi Both it was a case of left hand not knowing what the right hand hadn't done I thought I had removed the screw under the handle it came off fine
The Thatcham alarm went short circuit so I had to remove it! I am now fitting another! I want to make the doors function from the remote on the alarm "but" I cant see how to get the wires through to the door solenoid? it's a plug and socket in the door so no rout there! Has anyone done this? everything else is working fine
Hi k3cj5555 the 5 wires have to go from the alarm unit to the door activator, I thought originally I could tap into the standard loom but the switching on the door activator is different! I have taken the door plug and socket off and I think with careful drilling because there are two pins not used there may be enough room to get the "4" wires through the 5th being an earth is not needed.
I want the car to look correct I have had it 20 years Thanks John.
In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes) Most users ever online was 320 on Wed Sep 15, 2021 1:07 am
Users browsing this forum: No registered users and 1 guest
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum